INSTRUCTIONS
ATTENTION!
Observe the safety and assembly
instruc�ons in order to avoid the risk of injury or
damaging the product.
Only for domes�c use and not for commercial
use!
Important: Read these instruc�ons carefully and
thoroughly. Keep these instruc�ons to read
through at a later date. If you give the product to
anyone else at some point in the future, please
ensure you also pass on this manual.
Keep small parts out of the reach of children. Pay
a�en�on especially when unpacking it. Keep
plas�c bags and other packaging away from
children reach. Danger of Suffoca�on!
Check all elements and parts for damages.
Despite careful checks since may happen that
even the best product takes damage during the
transport.
In this case, do not build up of your product.
Defec�ve parts can endanger your health.
Never modify the product! Changes will void the
warranty and the product may be unsafe or even
dangerous.
For cleaning use a sponge and warm soapy water.
Do not use solvent based-cleaners or detergents
for example Bleach those can damage the
product.
Unpack all the parts and elements of the set and
place the components on the top of the carton or
other clean surface. This protects your new
product.
This protects your new product. Please also pay
a�en�on not to scratch the floor while working
with tools.
Make sure that this product is fully assembled
before use, as shown on the illustra�on.
OPERATION INSTRUCTIONS
The le� handgrip (blue control rod) is used to li�
and lower the digger’s arm.
The shovel is moved using the right handgrip
(yellow control rod).
Before permi�ng use of the toy, explain to your
child how the toy func�ons and make sure that he
or she can operate it adequately.
Explain to your child that sudden and violent
movements of the digger arm can injure other
children. Especially be mindful that the shovel can
cause injuries, par�cularly prone to injury are the
feet of other children (exp. When bare-foot!).
MAINTENANCE AND CARE
Wash metal parts with clean water and
subsequently dry with an absorbent towel.
Regularly check the digger once every 3 months
and make sure that all the bolts are �ghtened.
Please do not use anymore if excessive wear and
tear is found.
If any problems are detected, do not use the
product. Always replace all parts with original
replacements according to the manufacturer’s
guidelines.
If the product is not properly cared for and
maintained, it can become unsafe and can also
become damaged. This can lead to dangerous
situa�ons.
Regular maintenance on the product helps to
make the product safe and will also increase its
lifespan.
GUARANTEE
Defec�ve parts will only be replaced free of
charge during the guarantee period if the digger is
properly and correctly assembled and handled.
The guarantee however dose not cover normal
wear and tear or damages arising from collision
with other objects, falls or incorrect assembly.
Not suitable for children under 3 years of age
because of small parts which may be swallowed.
The toy must be stored in a safe place away from
the reach of very young children.
METAL DIGGER
ASSEMBLY INSTRUCTIONS
Please read the instruc�ons carefully before use
and store them in a safe place.
They contain important informa�on on safety and
use. The instruc�ons are to accompany the
product when it is passed on to others. The
manufacture and importer assume no liability in
the event that these instruc�on are not observed.
The metal digger is a toy and may only be used
under adult supervision. All packaging and/or
a�achments are to be removed before giving the
item to a child.
Please consider that given the nature of play and
children’s temperaments unexpected dangerous
situa�ons can arise for which the manufacturer
cannot assume responsibility.
WARNING
The digger must be assembled carefully by an
adult.
Never let your child play with the digger before it
has been fully assembled.
Instruct and train your child in the correct use of
the metal digger and call his or her a�en�on to
possible hazards.
The grounds on which the digger is used should
neither be extremely sloped nor have child-acces-
sible landings or steps or other poten�al sources
of danger.
Turn all the nut screws manually and �ghten the
nuts with a wrench.
ASSEMBLY
The bolt used to secure the seat post tube must
be correctly mounted ,otherwise the seat unit
may become loose and possibly injure the child .
Bolts should not be excessively �ghtened ,esp.
those connec�ng moving parts.
The yellow plas�c plates must be correctly assem
-
bled to avoid any risk of trapping the fingers.
4
5
www.DeubaXXL.de
www.DeubaXXL.de
