Loosen the 3 flat blade screws of the screw terminal,
about 4 turns each.
Line up the
Red
wire, with
5V
.
Black
wire with
GND
.
Yellow
wire with
OUT
.
Double check to be sure this pattern is correct before
connecting the AC adapter.
Insert and screw down the
Red
wire.
Insert and screw down the
Black
wire.
Insert and screw down the
Yellow
wire.
Plug in the AC adapter in to the wall, and then
plug it in to the DC barrel jack.
ONLY EVER USE THE SUPPLIED AC ADAPTER
THIS DEVICE RUNS ON 5V DC ONLY
