12
5
4
4)
To loosen the chain, turn the adjustment
screw on both sides counterclockwise.
5)
While adjusting the chain tension, work on
both sides of the flywheel. Adjust the angle
of the flywheel so it is straight front to rear
and evenly spaced within the frame side to
side (fig. 4).
» If the chain is stretched beyond
adjustment, the replacement of the chain
is recommended. Please contact customer
service for more information.
6)
Tighten the adjustment lock nuts and the axle
nuts on both sides alternating from side to
side. Replace the flywheel adjustment cover
before operation.
chain tension & aDJustment (continueD)
Brake paD replacement
1)
REMOVAL
Remove tension from the brake pad by turning the
Push Brake System knob counterclockwise, until
completely loose. Using a multi-wrench, remove the
two bolts supporting the brake pad onto the frame.
Remove the old brake pad.
2)
INSTALLATION
Position the new brake pad onto the frame. Carefully
re-install the two bolts through the brake pad bracket
onto the frame. Using a multi-wrench, tighten the bolts.
