background image

SPT-N11U and SPT-N12U Chassis Installation Instructions

2

|

SPT-N11U and SPT-N12U Installation Instructions

P/N 71-008728  Rev A, August 2019

Copyright

© 2019 Spirent Communications, Inc. All Rights Reserved. 

All of the company names and/or brand names and/or product names referred to in this 
document, in particular, the name “Spirent” and its logo device, are either registered 
trademarks or trademarks of Spirent plc and its subsidiaries, pending registration in 
accordance with relevant national laws. All other registered trademarks or trademarks are 
the property of their respective owners. The information contained in this document is 
subject to change without notice and does not represent a commitment on the part of 
Spirent Communications. The information in this document is believed to be accurate and 
reliable, however, Spirent Communications assumes no responsibility or liability for any 
errors or inaccuracies that may appear in the document.

Limited Warranty

Spirent Communications, Inc. (“Spirent”) warrants that its Products will conform to the 
description on the face of order, that it will convey good title thereto, and that the Product 
will be delivered free from any lawful security interest or other lien or encumbrance.

Spirent further warrants to Customer that hardware which it supplies and the tangible 
media on which it supplies software will be free from significant defects in materials and 
workmanship for a period of twelve (12) months, except as otherwise noted, from the date 
of delivery (the “Hardware Warranty Period”), under normal use and conditions.

To the extent the Product is or contains software (“Software”), Spirent also warrants that, 
if properly used by Customer in accordance with the Software License Agreement, the 
Software which it supplies will operate in material conformity with the specifications 
supplied by Spirent for such Software for a period of ninety (90) days from the date of 
delivery (the “Software Warranty Period”). The “Product Warranty Period” shall mean the 
Hardware Warranty Period or the Software Warranty Period, as applicable. Spirent does 
not warrant that the functions contained in the Software will meet a specific requirement 
or that the operation will be uninterrupted or error free. Spirent shall have no warranty 
obligations whatsoever with respect to any Software which has been modified in any 
manner by Customer or any third party.

Defective Products and Software under warranty shall be, at Spirent's discretion, repaired 
or replaced or a credit issued to Customer's account for an amount equal to the price paid 
for such Product provided that: (a) such Product is returned to Spirent after first obtaining 
a return authorization number and shipping instructions, freight prepaid, to Spirent's 
location in the United States; (b) Customer provides a written explanation of the defect or 
Software failure claimed by Customer; and (c) the claimed defect actually exists and was 
not caused by neglect, accident, misuse, improper installation, improper repair, fire, flood, 
lightning, power surges, earthquake, or alteration. Spirent will ship repaired Products to 
Customer, freight prepaid, based on reasonable best efforts after the receipt of defective 
Products. Except as otherwise stated, any claim on account of defective materials or for 
any other cause whatsoever will conclusively be deemed waived by Customer unless 
written notice thereof is given to Spirent within the Warranty Period. Spirent reserves the 
right to change the warranty and service policy set forth above at any time, after 
reasonable notice and without liability to Customer.

Summary of Contents for SPT-N11U



















Reviews: