background image

SPT-N11U and SPT-N12U Chassis Installation Instructions

Related Documentation

SPT-N11U and SPT-N12U Installation Instructions

|

17

P/N 71-008728  Rev A, August 2019

To insert the power cables:

1

Slide out the power cord retaining clip located above the socket.

2

Angle the retaining clip up and plug the power cord into the socket.

3

Slide the retaining clip to the location appropriate for your cord.

4

Push the retaining clip down over the cable.

The unit is now ready to be powered on and set up for operation. Refer to 

Getting Started 

with Spirent TestCenter

 for information on operating your chassis for the first time.

Related Documentation

SPT-N11U/SPT-N12U Chassis Power Supply Installation Instructions 

– Describes the 

procedure to install and remove power supplies

Getting Started with Spirent TestCenter 

– Provides hardware set up, software 

installation, licensing, and software upgrade and downgrade instructions

.

Using the ACC-2017 Hypermetrics Single-slot Card Carrier 

– Describes the 

procedure for installing and removing test modules that require card carriers for use in 
the SPT-N11U, SPT-N12U, and SPT-N4U chassis.

Using the ACC-2018 Hypermetrics Dual-slot Card Carrier 

– Describes the procedure 

for installing and removing test modules that require card carriers for use in the SPT-
N11U, SPT-N12U, and SPT-N4U chassis.

SPT-N11U and SPT-N12U

 

Fan Tray Replacement Instructions 

– Describes the 

procedure to replace the fan tray.

Spirent Hardware Reference

 – Describes Spirent chassis, modules, and accessories. 

Information is provided on module LEDs, multiple chassis connections, cables, and 
chassis commands. Basic information is provided on system administration functions 
and diagnostics.

Release Notes 

– Contain information that may affect product installation, test 

configuration, or test results, including last-minute requirements or product changes. 
It is highly recommended that you review all Release Notes before you install or use 
the SPT-N11U/SPT-N12U chassis.

Spirent Customer Service Center

The Spirent Customer Service Center (

https://support.spirent.com

) includes a powerful 

Knowledge Base. The Knowledge Base offers an easy-to-use browse mode and an 
intelligent search. Log in with your user ID and password to gain access to additional 
content that is available only to customers - user manuals, help files, release notes, 
technical bulletins, and more. When you log in, you also gain access to software and 
firmware downloads.

Summary of Contents for SPT-N11U



















Reviews: