Tech-X Flex™
Base Unit User Guide Issue 1
2: Wi-Fi Testing Menu
2-7
Intro
Wi
-F
i
10/100
Syste
m
IP/V
ide
o
S
pec
s
Once the unit successfully connects, the network parameters are saved in memory under the respective
SSID (name).
NOTE:
If you have trouble connecting, see
If you cannot connect (troubleshooting tips)
Setup - Connect (Wi-Fi Setup)
Table 2-1
Connect (Wi-Fi Setup) - Setup parameters page 1
Parameter
Description
SSID
(Service Set Identifier) Network name.
Channel Number
Channel used by the network, typically 1 to 11 with variances possible based on the
country of operation and applicable regulations. A Wi-Fi connection is based on a
single channel which you must have correctly specified.
Network Type
Type of network:
INFRASTRUCTURE
- A centralized network where the unit will negotiate with a
single access point that manages the network overall.
NOTE:
Connection to “adhoc” Wi-Fi networks is currently not supported.
Security Type
Type of security in use on the network:
•
WEP-64
- Wired Equivalent Privacy using a 40-bit key.
•
WEP-128
- Wired Equivalent Privacy using a 104-bit key.
•
NONE
- No security (open access)
