background image

 

 

                                                                   

22 

CAUTION

: the shorter the recovery time, the longer your heart rate will stay elevated; if you 

are new to exercise or have recently resumed an exercise program after a considerable 

amount of time off, it is recommended that your recovery interval length either matches or 

exceeds the length of the cardio interval. 

 

•    The  user selects 10 inter vals (5 cardio  and 5 strength) 

with the following inter val durations  – length of each 

cardio and recover y inter val  is 1:00 

• 

Program  begins with a 3:00 warm  up (1:00  @ Level  1, 

1:00 @ Level 2, and 1:00 @ Level 3).You  have the option

to press Enter to bypass the warm up. 

• 

1st cardio inter val begins, lasting 1:00; console  counts 

down to 0:00 and the Message Center displays 

“STRENGTH  INTERVAL BEGIN DUMBBELL ROW” 

• 

User exits the elliptical trainer  to perform the strength 

exercise. The user now performs 8-20 repetitions (each 

repetition is 1 up and down por tion of the exercise).   

       

Note: if you are a beginner or are in below average 

physical condition, perform  each repetition  in 

approximately 2 seconds (1 second up, 1 second down); 

if you are in average or above average physical condition, 

with    no  medical    issues, you  have  the  option    to 

perform the repetitions faster (1 second total: .5 seconds 

up, .5 seconds down). After completing all of your 

repetitions, sit back on the elliptical trainer  to proceed 

with your recovery interval.

 

•  Console displays “PRESS ENTER TO BEGIN RECOVERY”; 

user pedals @ Level  1 for 1:00 

•    Console  then  displays 2nd  cardio  inter val and the 

process proceeds until  the user  has performed 

 

• 

5 cardio, 5 strength, and 5 recover y inter vals; the 5 strength 

exercises will be performed 1x each. If you selected 20 

        inter vals, you would  perform  each strength exercise twice, 

before proceeding to the next exercise. If you selected 30 

inter vals, you will perform  each strength exercise 3x (each 

exercise once, until  all five have been performed, then 

repeat the sequence twice  more). 

 

• 

The  last 2 segments of the program    are a Cool Down 

phase with the user pedaling  @ Level  1.This can be by- 

passed by pressing Enter to end the program. 

 

Caution: Exercises that require dumbbell use - Select a 

pair of dumbbells that you will be able to safely and 

effectively maneuver for all of the strength intervals.

 

 

Summary of Contents for 161173795US




































Reviews: