Page 45 of 54
Setting the Hour
Press and release the + or – button to change the hour to the
correct hour and press set to store and to move to setting the
minute.
Repeat this for setting the minutes.
Setting the temperature display to Celsius or Fahrenheit.
Press and release the + or - button to toggle between C and F.
When the display shows the desired symbol, press and release
the “SET” button to store.
As the important settings above have now been done, press and
hold for a few seconds the “SET” button for a few seconds and
this will exit the setup menu.
The control is now ready for use with the Fire Control.
Advanced settings Menu
In the event that you may want to change the other preset settings of the
control features. Do not do a long press and hold above but a normal short
press and release will take you into the advanced settings area.
Advanced settings options are:-
•
Back light –
o
A = Automatic (default setting). The back light comes on in the dark
but not in the light.
o
0 = Light never comes on.
o
1 = Light comes on when ever handset is unlocked.
•
Display contrast – 8 levels from 0 to 7 (default level 4).
•
P = pairing with other devices other than the fire control. The hand set
can pair with other modules to :-
o
L= Operate an electric light – which is the dimmable in 9 steps
o
F= operate an electric fan –which can have 9 speed levels
o
A= operate an auxiliary contact to operate another device.
