ATTENTION
BEFORE STARTING, SOME RECOMMENDATIONS:
This generic manual is intended to assist you in assembling your computer. The installation varies
depending on the specifications of the chassis you have just purchased.
For advanced instructions, we recommend that you consult the installation manuals of your motherboard,
graphics card ... the different devices you want to install when assembling your configuration! We are not
responsible for the incorrect handling and / or installation of the components.
Stability and cleanliness: When assembling your chassis, plan for a flat, stable surface. Assemble it away
from dust in a well-lit room! Do not place your frame on the carpet that is charged with static electricity.
Take your time: Handle the frame carefully to avoid any risk of injury. Despite all the care we bring to the
manufacture of our products some inner edges of the chassis remain sharp! Avoid all sudden movements.
We recommend wearing gloves.
Always read before ... Each component is different! It is advisable to read in advance the instructions of
assembly of each element composing your computer like the CPU, RAM ... Example: consult the manual of
your cooler CPU for know the steps you need to consider before installing the motherboard.
Antistatic, what is it? : In order to preserve the integrity of the components, it is essential to protect them
against possible static electricity discharges from which your body is charged. Equipping you with an
antistatic wrist strap will allow you to handle your parts safely. Treat components and cards with care, do not
touch components or unshielded contacts. Always hold your card, your processor by its edges (never by its
pins.)
The right tools! We advise you to use the right tools for each step of the assembly. Do not use a "house"
screwdriver such as a coin, a knife tip, your fingernails ... You risk damaging your equipment or injuring
yourself. When assembling, do not force-tighten your components as this may damage the threads or break
the material.
Never force ... Before connecting a cable, make sure that both connectors are correctly aligned. The
connectors are often equipped with polarizer: a device, usually mechanical, to avoid assembly errors,
assembly or connection! Never force because bent pins may require replacement of the entire connector!
Questions ? If you have any doubt or can not assemble your components, contact support or call an
experienced technician.
DM7
RGB
Summary of Contents for 8805RGB
Page 1: ...WWW SPIRITOFGAMER COM...
