Customer Service 1-888-707-1880
Dyaco Canada Inc. 2016
Email: customerservice@dyaco.ca
6
IMPORTANT
ELECTRICAL INSTRUCTIONS
WARNING!
●
NEVER
use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill.
Route the power cord away from any moving part of the treadmill including the elevation
mechanism and transport wheels.
●
NEVER
remove any cover without first disconnecting AC power.
● If voltage varies by ten percent (10%) or more, the performance of your treadmill may be affected.
Such conditions are not covered under your warranty.
If you suspect the voltage is low, contact
your local power company or a licensed electrician for proper testing. See Diagnosis Guide, page 39.
●
NEVER
expose this treadmill to rain or moisture. This product is
NOT
designed for
use outdoors, near a pool or spa, or in any other high humidity environment.
Circuit Breakers
: Some circuit breakers used in homes are not rated for high inrush currents, (ARC
fault breakers are one example) that can occur when a treadmill is first turned on or even during use. If
your treadmill is tripping the house circuit breaker (even though it is the proper current rating) but the
circuit breaker on the treadmill itself does not trip, you will need to replace the home breaker with a high
inrush type. This is not a warranty defect. This is a condition we as a manufacture have no ability to
control. This part is available through most electrical supply stores. Examples: Grainger part # 1D237, or
available online at www.squared.com part # QO120HM.
This product must be grounded.
If the treadmill should malfunction or breakdown, grounding
provides a path of least resistance for electric current, reducing the risk of electric shock. This
product is equipped with a cord having an equipment-grounding plug. The plug must be plugged into
an appropriate outlet that is properly installed and grounded in accordance with all local codes and
ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or serviceman if you are in doubt as to
whether the product is properly grounded. Do not modify the plug provided with the product if
it will not fit the outlet, have a proper outlet installed by a qualified electrician.
●
NEVER
operate this treadmill without reading and completely understanding the results of any
operational change you request from the computer.
● Understand that changes in speed and incline do not occur immediately. Set your desired speed
on the computer console and release the adjustment key. The computer will obey the command
gradually.
●
NEVER
use your treadmill during an electrical storm. Surges may occur in your household power
supply that could damage treadmill components.
● Use caution while participating in other activities while walking on your treadmill; such as
watching television, reading, etc. These distractions may cause you to lose balance or stray from
walking in the center of the belt; which may result in serious injury.
●
NEVER
mount or dismount the treadmill while the belt is moving. Spirit treadmills start with at a
very low speed and it is unnecessary to straddle the belt during start up. Simply standing on the
belt during slow acceleration is proper after you have learned to operate the unit.
● Always hold on to a handrail or hand bar while making control changes (incline, speed, etc.).
Do not use excessive pressure on console control keys. They are precision set to function
properly with little finger pressure. Pushing harder is not going to make the unit go faster or
slower. If you feel the buttons are not functioning properly with normal pressure contact your
Spirit dealer.
