8
STEP 3:
Seat & Handle Bar
1. Install the Seat (
61
) on the Seat Carriage (
4
) with four Phillips Head Screws (
98
). Tighten with the
Phillips Head Screw Driver (
114
).
2. Attach the Seat Handle Bar (
6
) to the Seat Carriage (
4
) with the four Hex Head Bolts (
71
), four Flat
Washers (
77
), and four Nyloc Nuts (
89
). Tighten with the Wrenches provided (
112
&
130
).
3. Plug the Hand Pulse Sensor Cables (
27
) into the rear two holes on the left side of the rear plastic
cover. Plug the Handlebar Resistance Cables (
150
) into the remaining front hole.
HARDWARE
#98.
M6 x 15mm
Phillips Head Screw
(4 pcs)
#89.
3/8” x 7T
Nyloc Nut
(4 pcs)
#77.
3/8” x 19 x 1.5T
Flat Washer
(4 pcs)
#71.
3/8” x 1-3/4”
Hex Head Bolt
(4 pcs)
Summary of Contents for 161168355
Page 23: ...23 Exploded View Diagram...
