CUSTOMER SERVICE 1-888-707-1880 Dyaco Canada Inc. ©2013
8
STEP 2:
Swing Arms
1. Slide two Wave Washers
(150)
onto both the Left and Right Console Mast axle.
2. Slide the Swing Arms (L) and (R), (
10
&
11
) onto the appropriate side of the axle.
NOTE:
Make sure the arms are attached as shown in the illustration.
3. Place a Flat Washer
(141)
onto each Hex Head Bolt
(99)
and fasten in the end of the left
and right axle. Tighten with the wrench
(155)
.
HARDWARE
#150.
Ø
17 m/m
Wavy Washer (4 pcs)
#141.
5/16" × 23 × 1.5T
Flat Washer (2 pcs)
#99.
5/16" × 15mm
Hex Head Bolt (2 pcs)