Spirit Glide Trainer, Owner'S Manual

4

e

Glide 

Trainer

XG

200

#110. 

5mm Allen

Wrench

#111.

 14mm

Wrench

#116.

 6mm Allen

Wrench

Assembly Tools

1.  Using a razor knife (Box Cutter), cut the banding straps that wrap around the carton. Reach under the bottom 

edge of the carton and pull it away from the cardboard underneath, separating the staples that join the two 
together. Lift the box over the unit and unpack.

2.  Carefully remove all parts from carton and inspect for any damage or missing parts. If damaged parts are 

found, or parts are missing, contact your dealer immediately.

3.  Locate the hardware package. The hardware is separated into four steps. Remove the tools first. Remove the 

hardware for each step as needed to avoid confusion. The numbers in the instructions that are in parenthesis 
(

#

) are the item number from the assembly drawing for reference.

Pre-Assembly

XG

200

 A

ssembly 

Instructions

#107.

 Phillips Head 

Screwdriver

#108. 

8mm Allen

Wrench

#109.

 17mm 

Wrench

To assist you in assembling your new Spirit Fitness e•Glide Trainer, we have posted an assembly video at the  
following link: http://www.spiritfitness.com/customerservice/video/eglidevideos.html

Assembly Video