background image

                                                                                                                                                       

IN839

 

 

 
WARNING 

- Read all instructions before using this appliance. 

DANGER 

- To reduce the risk of electric shock, disconnect your Spirit treadmill 

from the electrical outlet prior to cleaning and/or service work. 

WARNING 

- To reduce the risk of burns, fire, electric shock, or injury to persons, 

install the treadmill on a flat level surface with access to a 120-volt, 20-amp 
grounded outlet. 
 
DO NOT USE AN EXTENSION CORD: DO NOT ATTEMPT TO DISABLE THE 
GROUNDED PLUG BY USING IMPROPER ADAPTERS, OR IN ANY WAY MODIFY 
THE CORD SET. A serious shock or fire hazard may result along with computer 
malfunctions. See Grounding Instructions, page 4. 
 

  Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both 

 

carpet and treadmill may result. 

 

  Do not block the rear of the treadmill. Provide a minimum of 3 1/2 feet clearance 

 

between the rear of the treadmill and any fixed object. 

 

  Keep children away from the treadmill. There are obvious pinch points and other 

caution areas that can cause harm. 

 

■  

Keep hands away from all moving parts. 

 

  Never operate the treadmill if it has a damaged cord or plug. If the treadmill is not 

working properly, call your dealer. 

 

■  

Keep the cord away from heated surfaces. 

 

  Do not operate where aerosol spray products are being used or where oxygen is 

being administered. Sparks from the motor may ignite a highly gaseous 

environment. 

 

■  

Never drop or insert any object into any openings. 

 

  Do not use outdoors. 

 

  To disconnect, turn all controls to the off position, remove tether cord, then remove 

the plug from the outlet. 

 

  Do not attempt to use your treadmill for any purpose other than for the purpose it is 

intended. 

 

  The pulse sensors are not medical devices. Various factors, including the user’s 

movement, may affect the accuracy of heart rate readings. The pulse sensors are 

intended only as exercise aids in determining heart rate trends in general. 

 

■  

Use handrails provided; they are for your safety. 

 

  Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable 

for use on your treadmill. Quality athletic shoes are recommended to avoid leg 

Important Safety Instructions 

Summary of Contents for inspire IN839

















Reviews: