background image

HOW TO USE THIS MANUAL 

 SPT17/20X  86037300  01/24/07 

1-1 

 

This manual contains the following sections: 
 

HOW TO USE THIS MANUAL 

SAFETY 

OPERATIONS 

MAINTENANCE

 

PARTS LIST

 

 

The HOW TO USE THIS MANUAL section will tell 
you how to find important information for ordering 
correct repair parts. 
 
Parts may be ordered from authorized dealers.

 

When placing an order for parts, the machine 
model and machine serial number are important. 
Refer to the MACHINE DATA box which is filled 
out during the installation of your machine. The 
MACHINE DATA box is located on the inside of 
the front cover of this manual.   
 
 
 
 
 
 
 
The SAFETY section contains important 
information regarding hazard or unsafe practices 
of the machine. Levels of hazards is identified that 
could result in product or personal injury, or severe 
injury resulting in death. 
 
The OPERATIONS section is to familiarize the 
operator with the operation and function of the 
machine. 
 
The MAINTENANCE section contains preventive 
maintenance to keep the machine and its 
components in good working condition. 

 
The PARTS LIST section contains assembled 
parts illustrations and corresponding parts list. The 
parts lists include a number of columns of 
information: 
 

 

REF – 

column refers to the reference  

number on the parts illustration. 

PART NO.

 – column lists the part 

number for the part. 

PRV NO.

 – reference number 

QTY

 – column lists the quantity of the  

part used in that area of the machine. 

DESCRIPTION 

– column is a brief  

description of the part. 

SERIAL NO. FROM

 – column 

indicates the first machine the part 
number is applicable to. When the 
machine design has changed, this 
column will indicate serial number of 
applicable machine. The main 
illustration shows the most current 
design of the machine. The boxed 
illustrations show older designs.  

-

     NOTES 

– column for information not 

noted by the other columns. 

 

NOTE: If a service or option kit is installed on your 
machine, be sure to keep the KIT INSTRUCTIONS 
which came with the kit. It contains replacement 
parts numbers needed for ordering future parts.

  

 

NOTE: The number on the lower left corner of the 
front cover is the part number for this manual.   

 

MODEL  _____________________________________ 
 

 

 

 

            

DATE  OF  PURCHASE  ________________________  
 

 

 

 

 

SERIAL   NUMBER  ____________________________ 
                                              

Summary of Contents for SPT17 10090370




























Reviews: