background image

                                                                                                            XE100  /  XE200  /  XE300  Elliptical

29

3.  The message window will ask you to enter your

Age

. You may enter your Age, using the Up

and Down keys or the numeric key pad, then press the Enter key to accept the new number
and proceed on to the next screen.

4.  You are now asked to enter your

Weight

. You may adjust the Weight number using the Up

and Down keys or the numeric key pad, then press enter to continue.

5.  Next is

Time

. You may adjust the Time and press enter to continue.

6.  Now you are asked to adjust the

Max Level.

 This is the peak exertion level you will

experience during the program. The factory setting is level seven. Adjust the level and then
press enter.

7.  Now the first column will be blinking and you are asked to adjust the level for the first

segment of the workout. When you finish adjusting the first segment, or if you don t want to
change, then press enter to continue to the next segment.

8.  The next segment will show the same level as the previously adjusted segment. Repeat the

same process as the last segment then press enter. Continue this process until all twenty
segments have been set.

9.  The message window will then tell you to press enter to save the program. After saving the

program the message window says  New program saved  then will give you the option to
Start or modify the program. Pressing Stop will exit to the start up screen.

10. If you want to increase or decrease the workload at any time during the program press the Up

or Down key. This will only affect the workload for the present position in the profile. When the
profile changes to the next column it will return to the preset work level.

11. During the User 1 or User 2 program you will be able to scroll through the data in the

message window by pressing the

Enter key.

Summary of Contents for XE 100














































Reviews: