XE Series Elliptical
23
BFE Warranty Policy – November 1
st
2013
1. When purchased from an authorised BFE distributor the BFE warranty shall guarantee that all framework
and components of your product are free from faulty manufacture. All faulty framework and components
will be repaired or replaced as set out in this policy. All warranties in this policy apply to
INDOOR
HOME/DOMESTIC USE ONLY.
2. These warranties do not apply to products used in commercial use applications.
3. Warranty
DOES NOT
cover normal wear & tear and excludes faults due to misuse, abuse, incorrect
assembly or lack of general maintenance.
4. Warranty is applicable to products sold and placed within Australia only.
5.
IMPORTANT
. Most of BFE products are pretested and we have inspectors checking all products prior to
shipment. The number one reason for a fault is due to
INCORRECT ASSEMBLY.
If you do have problems please go back to the start and double check your assembly and pay special
attention to all
WIRING
connections. If you have accidently cut or damaged the wiring please let us know
and we will be happy to send you a new set at no-charge.
If you have done this and are confident you have double checked your assembly and are still having
problems please email our service department at
spares@boylesfitness.com.au
including your best
contact details ,proof of purchase, serial number and a brief explanation of what is wrong.
Emailing is the quickest and most reliable way to get your service request processed. Once we have your
details we will either call or email you back with the next steps. The quickest way, once we determine the
problem and send you a replacement part, is that we can talk you through over the phone on how to fit it.
If it is deemed by our service tech that it is too difficult, we can arrange (where available) a service
technician.
NOTE.
If we arrange for a service technician ( where applicable) and it is found that it is not a
manufactures fault and found to be an assembly issue , normal wear and tear, transport damage or
misuse then there will be a call out fee of $140 depending on location. (Surcharge applies for non-metro
areas)
WARRANTY TERMS
- Warranty commences from the date of purchase from the retail store. Warranty only
applies to the original purchaser and is NON transferable. Warranty is void if the serial number of the product has
been removed or tampered with.
Warranty does not apply to defects, faults or failures due to:
(a) Defects caused during assembly or failure to assemble to the assembly manual provided. Assembly
errors include but are not limited to damaged wiring harness, stripped crank arms and or pedals and bolts
used in the wrong locations.
(b) Lack of general maintenance and or failure to service or maintain the equipment in accordance with the
user manual specifications and recommendations. This includes a lack of lubrication. Only use factory
supplied lubricant. DO NOT USE WD40 or anything simular. You can purchase lubricant from your retailer
or contact us directly at sales@boylesfitness.com.au
(c)
Power Surges
. The computers, control boards and motors are very sensitive to power fluctuations. You
must use a surge protector on all items that plug into your mains power otherwise your electronics will not
be covered by this warranty. You can purchase these from numerous retailers or you can call us on 02 46
366 680 to get a price.
(d) User negligence, abnormal or excessive use, misuse, abuse or transport damage.
(e) Repairs, alterations or modifications by NON BFE authorised service technician.
(f) Accident, fire, flood or malicious damage by third person.
(g) Ordinary wear and tear.
(h) Failure to keep the product in a clean, dry environment causing rust. You should wipe off any sweat and
moisture after each training session.
(i) Any products sold or placed in an application or the incorrect environment that is not recommended by
BFE or as not stipulated in the owner’s manual such as a commercial / rental environment will void the
warranty set forth by BFE
(j) BFE recommends the use of a protective rubber floor mat. This reduces the incidence of dust and lint
collection around the motor, reduces noise & protects your floor. You can purchase this from your retailer
or contact BFE directly on 02 46 366 680
