7
Elliptical
Trainer
XE
295
1. Untie the twist tie that holds each bushing (
22
) to the Connecting Arm end. Align the hole in the end of the
Connecting Arms (L & R) (
8
&
9
) with the hole in the bracket of the Swing Arms (L) and (R), (
10
&
11
). The
Connecting Arm ends should be inside of the Swing Arm (L) and (R), (
10
&
11
) brackets. Slide a Hex Head
Bolt (
104
) through each Swing Arm (L) and (R), (
10
&
11
) bracket and each Connecting Arm end.
2. Slide a Flat Washer (
80
) onto each bolt, then fasten the arms together by tightening a Nyloc Nut (
71
) to each
bolt using the wrenches provided (
109
&
106
) wrenches.
HARDWARE
STEP 3:
Connecting Arm
#80.
5/16” x 20 x1.5T
Flat Washer
(2 pcs)
#71.
5/16”
Nyloc Nut
(2 pcs)
#104.
5/16” x 1-1/4”
Hex Head Bolt
( 2 Pcs)
