XE320 Elliptical
11
STEP 4: PLASTIC PARTS ASSEMBLY
1. Install the Connecting Arm Covers (L & R) (57 & 58) over the connection of the rod end and
Connecting Arms (L) and (R), (8 & 9) with 4pcs of M5 x 15m/m Phillips Head Screws (105) and 2pcs
of Ø 3.5x12m/m Sheet Metal Screws (87) by using the Phillips Head Screw Driver (108).
2. Install the 2pcs of Slide Wheel Covers (52) above the Slide Wheel, Urethanes (39) with 4pcs of
M5x15m/m Phillips Head Screws (105) by using the Phillips Head Screw Driver (108).
3. Locate the 2pcs of Rear Stabilizer Cover (A) (19) and 2pcs of Rear Stabilizer Covers (B) (20) for the
Rear Rail Assembly and install with 4pcs of M5 x 15m/m Phillips Head Screws (105) by using the
Phillips Head Screw Driver (108).
Then install Front Stabilizer Cover (49) with 2pcs of M5 x 15m/m Phillips Head Screws (105) by using
the Phillips Head Screw Driver (108).
4. Install the Front Handle Bar Covers (L & R) (54 & 55) and Rear Handle Bar Covers (L & R) (54~1 &
55~1) over the Handle Bars axle connections with the 8pcs of Ø 3.5x12m/m Sheet Metal Screws (87)
by using Phillips Head Screw Driver (108).