Spirit XE395 Elliptical, Owner'S Manual

3

Elliptical 

Trainer

XE

395

Important Electrical Instructions

WARNING

!

NEVER

 remove any cover without first disconnecting AC power. If voltage varies by ten 

percent (10%) or more, the performance of your elliptical may be affected. Such  
conditions are not covered under your warranty. If you suspect the voltage is low, contact your 
local power company or a licensed electrician for proper testing.

NEVER

 expose this elliptical to rain or moisture. This product is NOT designed for use out-

doors, near a pool or spa, or in any other high humidity environment. The operating  
temperature specification is 40 to 120 degrees Fahrenheit, and humidity is 95% non-condensing 
(no water drops forming on surfaces).

This product must be grounded. 

If the elliptical should malfunction or breakdown, grounding provides a 

path of least resistance for electric current, reducing the risk of electric shock. This product is equipped with a cord 
having an equipment-grounding plug. The plug must be plugged into an appropriate outlet that is properly installed 
and grounded in accordance with all local codes and ordinances.

DANGER

 - Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check 

with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not 
modify the plug provided with the product if it will not fit the outlet; have a proper outlet installed by a qualified  
electrician.
This product is for use on a nominal 110-volt circuit, and has a grounding plug that looks like the plug illustrated  
below. A temporary adapter that looks like the adapter illustrated below may be used to connect this plug to a 
2-pole receptacle as shown below if a properly grounded outlet is not available. The temporary adapter should 
be used only until a properly grounded outlet, (shown below) can be installed by a qualified electrician. The green 
colored rigid ear-lug, or the like, extending from the adapter, must be connected to a permanent ground such as a 
properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw.

Grounding Instructions