Model
XE526SE
Work
Replacing Parts
The Parts 10.
The Bushing Housing
Rev.
Procedures
：
1.
Follow procedures 2 & 3 to take apart
the connecting arm and the pedal arm.
2.
Use 12mm wrench to release 5/16" x
15m/m hex head screw and 5/16" x 35 x
1.5T flat washer and take apart the
bushing housing, as shown in figure 1.
3.
To resume, return in order the plastic
wave washer and
ψ
25 wave washer
onto the axle then install the bushing
housing on the axle and secure with
5/16" x15m/m hex head screw and
5/16" x 35 x 1.5T flat washer, as shown
in figure 2.
4.
Reverse above steps to return the pedal
arm and the connecting arm.
1
2
