13
FUNCTIONS
COMPUTER OPERATION INSTRUCTIONS
Display view
Dot matrix
Program buttons
Heart rate indicator
Fan
Heart rate bar graph
Fan power switch
Message window
Pulse sensors
Control keys
Display view
Power on
The Elliptical has a built-in generator for power and does not need to be plugged into an AC outlet. To power up the
Elliptical simply start to pedal, the console will turn on automatically. If the console does not light when you pedal,
check that the power switch is set to 0 (Generator). The switch is located on the front, lower left side of the main
plastic cover. This switch should always be set to ”O” for generator. The A.C. setting is for factory testing and
dealer display models.
When initially powered on the console will perform an internal self-test. During this time all the lights will turn on
for a short time. When the lights go off the dot matrix display will show a software version (i.e. VER 1.0) and the
message window will display an odometer reading. The odometer reading displays how many hours the elliptical
has been used and how many virtual miles the elliptical has gone. The display shows: ODO 123 MI 123 HRS.
The odometer will remain displayed for only a few seconds then the console will go to the start up display. The dot
matrix display will be scrolling through the different profiles, showing the programs, and the message window will
be scrolling the start up message. You may now begin to use the console.
Summary of Contents for XE850-A27
