According to the surface of installation, choose the
appropriate screws needed for mounting (use mounting
screws for wood surfaces, use mounting screws and concrete
anchors for concrete surfaces).
Tools Required
Screwdriver
Drill Bit
Spirit Level
Pencil or Pen
Power Drill
1
2
Line up the parts shown in the
diagram above.
$ɝ[WKHVFUHZVWRWKHFRUQHUVWR
hold the sides together.
Connect the corner pieces to all four
sides.
3
Flip the screen over. Slide the rods
through all four edges of the screen.
4
0HDVXUHWKHKRUL]RQWDODQGYHUWLFDO
positions of the bracket locations on
the screen.
Install the springs on the four
corners and middle position of each
VLGHȴUVW
Install the remaining springs one by
one in order.
5
Screw in all four brackets.
7
Use your measurements from step 8 to correctly
locate the wall section of the bracket and mark
ORFDWLRQVIRUȴ[LQJGULOOLQJ
9
8
6
Fix the wall brackets using
DSSURSULDWHȴ[LQJVΖI\RXDUHLQDQ\
doubt we recommend contacting a
professional.
