Spitfire MA6720 AU series, Owner'S Manual

This manual is designed to make it as easy as possible 

to assemble, install, operate, and maintain this ceiling fan

Unpacking Instructions

For your convenience, check-off each step.  As each step is completed, place a check mark.  This will ensure that all 

steps have been completed and will be helpful in 

fi

 nding your place should you be interrupted. 

Wiring and connectors must be of type required by

local regulations. The minimum wire would be a 3-

conductor (2-wire with ground). 

Tools Needed for Assembly

Materials

NOTE:

  If you are uncertain of part description, refer to

exploded view illustration. (Figure 1, page 10)

3

1.

Check  to  see  that  you  have  received  the  following 

parts:

• Fan Motor

 Assembly

• Downrod

• Hanger Bracket

  Assembly

Blade Plate

•

Magnet

•

Wall Control

•

Speed Capacitor

•

• One Phillips head screwdriver

  (supplied)

• One stepladder

• One small blade 

   screwdriver

• One wire stripper

• Hardware bags:

▲

WARNING

Do  not  install  or  use  fan  if  any  part  is  damaged  or 

missing.    This  product  is  designed  to  use  only  those 

parts supplied with this product and/or any accessories 

designated  specifically  for  use  with  this  product. 

Substitution of parts or accessories not designated 

 for use with this product could result in personal injury 

 or property damage. 

IF ANY PART IS DAMAGED OR MISSING, 

CALL: 1300 469 326    

▲

WARNING

This fan must be installed by a licensed electrician.

Hardware Bags

   – 1/4-20 mm Screw 
   – Flat Washer Ø12 x Ø6.5 mm

   – Phillips screwdrive

r, 10 cm

   – Allen Wrench 3/32

˝x 56 mm

Hanger Bracket

Assembly

Blade Plate

Wall Control

Speed Capacitor

Magnet

Fan Motor Assembly

Downrod

−#8-32 x 1.5˝ Pan Head Screws 

−

Ø14 x Ø5.5 mm Flat Washers 

−

#4.5 External Tooth Washer

−Spring Washer M4.5 

−Hex Washer Phillips Head Tapping 

  Screws M6-10 x 2˝