I N S T A L L A T I O N M A N U A L
www.spitzerlighting.com
702 Interchange Blvd., Newark, DE 19711 • Toll Free: 844-312-4574
Specification is subject to change without notice
LED UFO HIGH BAY
HB08A-150W-50K-277V-9NS / HB08A-240W-50K-277V-9NS
2/2
INSTALLATION
(CAUTION: BEFORE BEGINNING INSTALLATION TURN OFF THE CIRCUIT BREAKER AND LIGHT SWITCH.)
ACCESSORIES
PROBLEM
POSSIBLE CAUSE
SOLUTION
Light will not
come on
A. Light switch is turned off.
B. Fuse is blown or circuit
breaker is turned off.
C. Incorrect circuit wiring.
A. Turn light switch on.
B. Replace fuse or turn circuit
breaker on.
C. Verify that fixture is wired
properly.
TROUBLE SHOOTING
CAUTION:
Before attempting to clean the fixture, disconnect the power to the fixture by
turning the breaker off or removing the fuse from the fuse box. This LED light fixture is made
from quality materials that will last many years with minimum care and maintenance. You
may want to clean the fixture with a soft cloth periodically. To maintain the best appearance
of the fixture, do not use cleaners with chemicals, solvents or harsh abrasivers. Do not use
liquid cleaner on the LEDs, LED driver, or wiring inside the light fixture.
The wiring scheme is suitable for 1-10V dimmable power supply
with microwave motion sensor to achieve 3-step dimming function.
CARE AND MAINTENANCE
OPTION 2 : PENDANT MOUNTED
Option 2 is pendant mounted by a suspender. showed as
Figure 2-1
.
OPTION 1 :
COVER + WIRE MESH
OPTION 2 :
COVER + CLEAN LENS
OPTION 3 :
MICROWAVE MOTION SENSOR
OPTION 4 :
JUNCTION BOX
OPTION 3 : SUSPENDED MOUNTED
Option 3 is suspended mounted by lifting hook. showed as
Figure 2-2
Figure 2-1
Figure 2-2
From Dimmable Luminaire
DIM-/DIM+
From Dimmable Luminaire
N/GND/L
Main Input
GND
N
L
Motion Sensor
L - Out
L - In
DIM+
DIM-
N
