VAPOR TIGHT SERIES
I N S T A L L A T I O N M A N U A L
DIAGRAM OF CONNECTION
www.spitzerlighting.com
702 Interchange Blvd., Newark, DE 19711
Specification is subject to change without notice
2/2
CARE AND MAINTENANCE
CAUTION: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or
removing the fuse from the fuse box. This LED light fixture is made from quality materials that will last many years
with minimum care and maintenance. You may want to clean the fixture with a soft cloth periodically. To maintain
the best appearance of the fixture, do not use cleaners with chemicals, solvents or harsh abrasives. Do not use
liquid cleaner on the LEDs, LED driver, or wiring inside the light fixture.
TROUBLE SHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
Light will not come on
A. Light switch is
turned off.
B. Fuse is blown or
circuit breaker is
turned off.
C. Incorrect circuit
wiring
A. Turn light switch on
B. Replace fuse or turn
circuit breaker on
C. Verify that fixture is
wired properly
