P n e u m a t i c
D r i l l
2 1 3 6 2 0 0 1 0
Translation of the original manual,
compiled: 01.09.21
213620010_BA_en_Version_01.doc
Page 28 of 30
After completing maintenance and repair work and
before restarting production make sure that…
all materials, tools and other equipment which are required for maintenance or repairs have been
removed from the work area of the machine,
any fluid leaks have been removed,
all safety devices on the machine have proper function,
fixtures of screw connections are tight,
removed covers, screens or filters were reinstalled.
The employer ensures that all maintenance, inspection and assembly work is done by authorized and
qualified experts.
Disassembly- Re-assembly
Maintenance and repair
Disassembly and re-assembly should be done according to the exploded views, respectively the sectional
drawings (see repair instruction). All work regarding disassembly and re-assembly, have to be executed by
SPITZNAS or skilled staff only.
DANGER
– Working with the machine without appropriate preparation and disregarding of
instructions. Shut down the machine properly and let it cool down to the ambient temperature.
NOTICE
– Special instructions apply for the repair of explosion-proof machines.
Retrofits or modifications of the machine need the manufacturer’s acceptance.
The explosion-
proof machine is designed in the type of protection „c“ constructive safety.
All work executed on the machine, influencing the explosion protection, e. g. repairs with
mechanical machining, require an approval of an authorized expert or have to be done by the
manufacturer.
The internal structure must remain unmodified.
Storage
Unused machines and machine tools should be kept in a dry, closed room.
Keep them free from damaging influences such as damp, frost or large temperature fluctuations as well as
mechanical damage. Always store the machine in a way that important machine instructions, e. g. on
stickers and signs, remain legible.
Disposal
Dispose of machine and worn out/defective machine tools according the local/national regulations. Fully
disassemble the machine for the necessary disposal. Separate materials according to local environmental
specifications. Dispose of environmentally hazardous greasing, cooling or cleaning agents in order to avoid
environmental contamination.
Environmental Regulations
When working on or with the equipment, it is imperative to observe all legal requirements in regards to
waste-disposal and proper recycling.
In particular during installation, repair and maintenance work, water damaging agents, such as
lubricating grease and oil,
coolant,
solvent containing cleaning agents
must not leak into the ground or reach the sewage system.
These materials must be stored, transported, contained and disposed of in suitable containers!
B.V.Technisch Bureau Duspra Amersfoortseweg 24-14 3951 LB Maarn The Netherlands
Tel: +31(0)180-410100 E: sales@duspra.nl W: www.duspra.nl