Step 1: Assembling the Ladder Top
1. Apply the Step Stiffener on the narrow end of one of the Platform Step Supports. 2. Insert the three Platform
Step Supports into the Ladder Platform piece with the Step Stiffener. 3. Insert the second Ladder Platform Piece
on top of the first and push down. 4. Place the second Step Stiffener on the Second Platform Piece. 5. Insert the
final Platform Piece and push down.
Step 2: Assembling the Waterside Steps
1. Apply the Plastic Plugs to the top holes of the two Interior Step Rails. 2. Begin sliding the first Interior Step
towards the bottom of the Interior Step Rails. 3. Now insert two Metal Pins into the Interior Step Rail’s holes. 4.
Push the Interior Step into place. Use the same procedure for the remaining Interior Step.
3
©
2003-Splash Superpools Ltd.
Parts Needed:
D. (3) Platform Pieces
E. (3) Platform Step Supports
J. (2) Step Stiffeners
J
D
E
1
2
3
4
5
Parts Needed:
A. (2) Interior Step Rails
C. (2) Interior Steps
L. (4) Metal Pins
M. (2) Plastic Plugs
2
4
M
C
A
L
L
3
1
Summary of Contents for TitanPool3
Page 1: ...By Owner s Guide...
