7
Detergents and
Additives
Wash cycle
Temperature
Spin
Speed
Recommended
Load Size
Duration
(minutes)
Prewash
(**)
Wash
Fabric
softener
Bleach
(**)
1
2
3
4
Default/Max
Min
Default
Whites
Hot/Hot
Cold
Fast
Full
The dur
ation of the w
ash c
ycles can be checked on
the displa
y.
Colors
Warm/Warm
Cold
Fast
Full
-
-
Regular
Warm/Hot
Cold
Fast
Full
-
Express
Warm/Warm
Cold
Fast
Full
-
-
Dry Cotton
-
-
-
Half
NOTE:
A high spin is carried out during the 2:25' Timed
Dry using the Cotton Dry cycle.
Perm Press
Warm/Warm
Cold
Fast
Half
-
-
Lightly Soiled
Warm/Warm
Cold
Fast
Half
-
-
Dry Synthetic
-
-
-
Half
-
-
-
-
Delicates
Cold/Cold
Cold
Fast
Half
-
-
Silk
Cold/Cold
Cold
Off
Quarter
-
-
Dry Wool
-
-
-
Half
-
-
-
-
Wool
Cold/Cold
Cold
Fast
Quarter
-
-
-
-
-
Empty
-
-
-
Rinse + Spin
Cold/Cold
Cold
Fast
Full
-
-
-
-
Spin + Drain *
-
-
Fast
Full
-
-
-
-
Required dosage
Optional dosage
- The recommended load size refers to the visual size of the load in the drum i.e. "
half
" means the drum should be approximately half full.
WASH CYCLES
Follow the instructions on the symbols of the garment’s wash
care label. The value indicated in the symbol is the maximum
recommended temperature for washing the garment.
NOTE: The machine remembers your last option selection
for Temperature and Spin Speed, and will use it for future wash cycles until
you deselect that option i.e. if temperature is changed from the default setting
on the Regular wash cycle, the machine will use this modified setting next
time a Regular wash cycle is selected.
To restore factory defaults for Temperature and Spin Speed, refer to the WASH
CYCLE TABLE.
Whites
Use this cycle when using liquid chlorine bleach.
Pour the bleach, the detergent and the additives into the relevant compartments.
Colors
This cycle is intended for use with colored fabrics, including cotton
and synthetic garments.This cycle is designed to use less hot water, and
is suitable for lightly soiled garments.
Regular
Suitable for washing normally soiled cottons and linens.
Express
This wash cycle was designed to wash lightly soiled garments quickly. By
selecting this wash cycle (
“Express”
at WARM temperature), it is possible to
wash different fabrics together (except for wool and silk items).
Perm Press
This cycle has less mechanical agitation and lower spinning speed
designed to reduce wrinkles.
Lightly Soiled
This wash cycle was designed to wash lightly soiled garments quickly.
By selecting this wash cycle (
“Lightly Soiled”
at WARM temperature),
it is possible to wash different fabrics together (except for wool and
silk items). For this cycle we recommend pretreating stains, shirt necks
and wrists with specific antistain products.
This cycle is also used for winterization. Refer to the RV/MARINE
WINTERIZATION section for details.
Delicates
For washing very delicate garments. It is advisable to turn the garments
inside out before washing them.
Silk
Use special wash cycle to wash all silk garments. We recommend the use
of special detergent which has been designed to wash delicate clothes.
Wool
For washing wool garments. For best results, use special detergents and
do not exceed the maximum recommended load indicated in the
“Wash Cycle Table.
Clean Washer
This cycle uses a higher water volume in combination with regular
liquid chlorine bleach to thoroughly clean the inside of the washer-
dryer. Do not use thickened or splash-less bleach for this cycle. When
using this cycle, the drum must be empty.
Rinse + Spin
Rinses and then spins. For resilient garments.
Spin + Drain
Spins the load then empties the water. For resilient garments. If you
exclude the spin cycle using the
button, the machine will only drain.
DRY CYCLES
To perform a dry only cycle, turn the cycle selector knob to either Dry
Cotton, Dry Synthetic, or Dry Wool. Then, press the
Timed
Dry
button to select
the Timed Dry option that you want. You may also choose the Low Heat
option by pressing the
Low
Heat
button. Note that for best drying performance,
avoid tightly packing the drum. The drum should be approximately half
full for best performance.
Dry Cotton
Cottons and linen items.
Dry Synthetic
Synthetics and synthetic-blend items.
Dry Wool
Wool or gentle hand wash items.
A Timed Dry must be used with any of the three dry cycles above.
Timed Dry
To activate a Timed Dry, press the
Timed
Dry
button and ensure the
icon is lit
on the display. To change the duration of the timed dry, press the
Timed
Dry
button until the display shows the desired amount of time. To turn off the
Timed Dry feature, press the
Timed
Dry
button until the
icon is no longer lit.
Timed Dry options include Off, 25’, 45’, 1:05’, 1:35’, 2:05’, 2:25’.
2:25’ timed dry is only available for select cycles. When using the Timed
Dry feature, the dry cycle will only last as long as the selected time, and
then end regardless of the dryness level of the load inside the drum.
Low Heat
To activate Low Heat, press the
Low
Heat
button and ensure the icon is lit on
the display. To turn off the Low Heat feature, press the
Low
Heat
button and
ensure that the icon is no longer lit.
WASH + DRY CYCLES
To perform a wash + dry cycle, turn the cycle selector knob to the desired
wash cycle. Then, use the
Timed Dry
and instructions on using the
Low
Heat
option.
See
DRY CYCLES
section for instructions on how to activate a
Timed Dry
and instructions on using the
Low Heat
option.
DISPLAY
The display is useful when programming the washer-dryer and provides
plenty of information.
C
B
A
Slow
Cold
Hot
Spin+
Drain
Wash Rinse
Dry
Fast
D
D
B
Temp
Spin
The duration of the available wash cycles and the remaining time of a running
cycle appear in section
A (
Factors such as load size, modifiers, options
selected, and water pressure may affect the time shown in the display.
Tightly packed loads, unbalanced loads, or excessive suds may cause the washer-
dryer to lengthen the cycle time as well); if the DELAYED START option has been
set, the countdown to the start of the selected wash cycle will appear.
In section
B
pressing the corresponding button allows you to view the
maximum spin speed and temperature values attained by the machine
during the set wash cycle, or the values selected most recently, if these
are compatible with the set wash cycle.
The “wash and dry cycle phases” corresponding to the selected wash cycle and
the “wash and dry cycle phases” of the running wash cycle appear in section
C
:
Wash
Rinse
Spin + Drain
Dry
References
D
indicate the Dry options available (See “DRY CYCLES” section).
The “Delay Start” symbol
, when lit, indicates that the set “delayed start”
value has appeared on the display.
The
symbol indicates the possibility to silence the key tones
While the mute is active, almost all sounds will be turned off. Only the sound
signals and the alarms remain active, as well as the sound of the end of cycle.
For activate/deactivate the mute press and hold
button.
Key Lock
To lock the control panel, press and hold the “Key lock”
button for
approximately 3 seconds. The symbol
will light up on the display to
indicate that the control panel has been locked (with the exception of the
“ON/OFF“ button). This prevents unintentional changes to programs,
especially with children near the machine. To unlock the control panel,
press and hold the “Key lock”
button for approximately 3 seconds .
Locked door indicator
When lit, the symbol indicates that the door is locked. To prevent any
damage, wait until the symbol turns off before opening the door.
To open the door while a cycle is in progress, press the START/PAUSE
button
; if the
symbol is off, the door can be opened.
FIRST-TIME USE
WARNING
Fire Hazard
Never place items in the washer that are dampened
with gasoline or other flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Doing so can result in death, explosion, or fire.
Once the appliance has been installed, and before it is used for the first time,
run a “Clean Washer
” cycle with liquid chlorine bleach and no laundry.
DAILY USE
Prepare the laundry by following the suggestions appearing under the
“TIPS AND SUGGESTIONS” section.
- Press the ON/OFF button .
- Open the door. Load the laundry while making sure not to exceed the
maximum load quantity indicated in the wash cycle table.
- Pull out the detergent dispenser drawer and pour the detergent into the relevant
compartments, as described in the “DETERGENT DISPENSER DRAWER” section.
- Close the door.
- The machine automatically displays the default temperature and spin
speed values for the selected cycle, or the most recently used settings for
that specific cycle.
- Select the desired wash or dry cycle.
- Select the desired options.
- Press and hold the START/PAUSE
button to start the wash.
