Installation and Reference Manual
Configuring PBX functionality
Installation and Reference Manual v3.2/0410/6
121
Automatically dial an extension when a specific phone is picked up
The extension number of the phone to be picked up is
entered in the Translate To field.
Create this entry within a new Dial Plan, set the Dial
Delay Count and Time to 0 and configure the User
assigned to the phone with the new Dial Plan.
Silent call monitoring
The extension number to be monitored is entered in
the Translate To field. Therefore, in this example the
User would dial, for example, 5552042.
Default Dial Plan entries
Files containing ready-made Dial Plan entries are available with the system and can be imported into
configuration as described in the Importing and Exporting the Configuration section from page 240.
These files also contain the Dial Plan entries required for use with the pre-programmed buttons on the
PCS 10 and PCS 520 analogue handsets, and the Dial Plan entries required to match the System Feature
Guide displayed on the PCS 5 and PCS 505. Dialplan.txt contains the entries required for the PCS 5,
PCS 10, PCS 505 and PCS 520. Dialplan520.txt contains the entries required for the PCS 520. These entries
can be created manually if preferred.
Dial Plan entries required for the PCS 520
Number Match
Action
Translate To
*50
Voicemail Retrieve
*51
Park
-1
*52
Pickup
1
*53
Pickup
2
*54
Pickup
3
*55
Pickup
4
*56*
Follow Me Set
%r
*57
Follow Me Enable
*58
Follow Me Disable
*59
Voicemail Greeting