manualshive.com logo in svg

Splicecom Maximiser, Installation And Reference Manual

The Splicecom Maximiser User Manual is a comprehensive guide that enables users to fully utilize the product's features. Easily accessible, it is available for free download from our website, offering a step-by-step manual to help you optimize the Splicecom Maximiser's capabilities.

Share
Download
background image

Installation and Reference Manual

 

 

 

System Architecture 
Installation and Reference Manual v3.2/0410/6 

 

19 

 

Companies 

Users, Departments, Contacts and Meet Me Conferences can be assigned to different Companies so that 
in a multi-tenancy system Users are unaware of the usage of the system by other businesses.  An Auto 
Attendant can be assigned to each Company.  Please refer to the Working with Companies section from 
page 155 for further details. 
 

Trunks 

Trunks are the method used for outgoing or incoming communication with the system whether via ISDN, 
SIP, or H.323.  Each Trunk port available on the system can be configured individually.  Please refer to the 
Working with Trunks section from page 159 for further details. 
 

Trunk Groups 

A Trunk group allows the grouping together of multiple Trunks for delivery of calls.  This is very useful in 
geographically organising the flow of calls, and can also be used to differentiate levels of service, by 
keeping spare capacity for high priority calls.  Please refer to the Working with Trunks section from page 
161 for further details. 
 

DDI Call Plans 

Direct Dial In Call Plans determine how incoming ISDN calls will be routed.  Please refer to the Working 
with DDI Plans section from page 169 for further details. 
 

LCR Plans 

LCR Plans apply to all calls that will be routed to a trunk via a gateway.  It allows the best selection of a 
trunk and selection of service providers, based upon the number dialled and time of day.  It can also be 
used to control the geographic exit point from the network, eg all calls to London numbers would exit via 
a London trunk module, but calls to Edinburgh would exit via the Edinburgh trunk module.  If a trunk 
should be busy or fail then alternate translations and trunks would be used.  Please refer to the Working 
with LCR Plans section from page 175 for further details. 
 

Voicemail Ports 

A Voicemail Port determines the facilities provided by a Call Server’s voicemail service.  Where more than 
one Call Server is active on a system Voicemail Ports allow different capabilities to be assigned to each 
Call Server providing a voicemail service.   Please refer to the Working with Voicemail section from page 
188 for further details 
 

Music Channels 

Music Channels determine how music on hold is played when external calls are placed on hold either 
from an internally stored WAV file or via an external source.  Please refer to the Configuring Music 
Channels section from page 177 for further details. 
 

Events 

Events allow web pages to be sent to a PCS 60, PCS 50 or PCS 410/400 to display warning messages, 
company information etc.  A Relay Input port or a Dial Plan entry can activate an Event.  Please refer to 
the Using Events section from page 181 for further details. 
 

VXML Scripts 

VXML Scripts provide the ability to create multi-level auto-attendants incorporating features such as 
availability based routing, dial by extension, out of hours routing and text-to-speech.  Please refer to the 
Creating VXML Scripts section from page 225 for further details. 
 

Summary of Contents for Maximiser













































































































































































































































































































































































Reviews:

No comments

Related manuals for Maximiser

Olympia 4500 Operating Manual preview
4500
Brand: Olympia Pages: 40
Karel MS48IP Technical Reference And Installation Manual preview
MS48IP
Brand: Karel Pages: 56
Karel MS26S Easy To Use Owner'S Manual preview
MS26S
Brand: Karel Pages: 55
Yealink SIP-T57W Manual preview
SIP-T57W
Brand: Yealink Pages: 8
Yealink T41S Quick Reference Manual preview
T41S
Brand: Yealink Pages: 6
Yealink T33G Quick Start Manual preview
T33G
Brand: Yealink Pages: 9
Panasonic KX-TG8070E Quick Manual preview
KX-TG8070E
Brand: Panasonic Pages: 8
Panasonic KX-TG7331FX Quick Manual preview
KX-TG7331FX
Brand: Panasonic Pages: 10
Panasonic KX-TG6021 Operating Instructions Manual preview
KX-TG6021
Brand: Panasonic Pages: 56
Panasonic KX-TVA50 Subscriber'S Manual preview
KX-TVA50
Brand: Panasonic Pages: 72
Uniden EXP95I Important Safety Instructions Manual preview
EXP95I
Brand: Uniden Pages: 47
Uniden TRU 5865 Series Manual D'Utilisation preview
TRU 5865 Series
Brand: Uniden Pages: 60
Binatone Speakeasy 17 User Manual preview
Speakeasy 17
Brand: Binatone Pages: 36
Vega C-2002 Technical Manual preview
C-2002
Brand: Vega Pages: 60
HTC KAIS100 User Manual preview
KAIS100
Brand: HTC Pages: 232
Avvio IP-850 User Manual preview
IP-850
Brand: Avvio Pages: 62
Aastra ITE-780 Quick Reference preview
ITE-780
Brand: Aastra Pages: 2
Aastra Maestro 3500CW User Manual preview
Maestro 3500CW
Brand: Aastra Pages: 20

Brands by name

Popular brands

Load more brands