manualshive.com logo in svg

Splicecom Maximiser, Installation And Reference Manual

The Splicecom Maximiser User Manual is a comprehensive guide that enables users to fully utilize the product's features. Easily accessible, it is available for free download from our website, offering a step-by-step manual to help you optimize the Splicecom Maximiser's capabilities.

Share
Download
background image

Installation and Reference Manual

 

 

 

Field Descriptions 
Installation and Reference Manual v3.2/0410/6 

 

297 

 

Forward On No Answer Disable – turn off the Forward on No Answer option for the User whose User 
Name or extension number has been entered in the Translate To field.  If the Translate To field is blank 
this Action will be activated for the User on whose extension the short code was dialled. 
 
Forward On No Answer Enable – turn on the Forward on No Answer option for the User whose User 
Name or extension number has been entered in the Translate To field.  If the Translate To field is blank 
this Action will be activated for the User on whose extension the short code was dialled. 
 
Forward On No Answer Set – set the Forward on No Answer number field to the number entered in the 
Translate To field.  This will be activated for the User on whose extension the short code was dialled. 
 
Forward On No Answer Toggle – toggle on/off the Forward on No Answer option for the User whose 
User Name or extension number has been entered in the Translate To field.  If the Translate To field is 
blank this Action will be activated for the User on whose extension the short code was dialled. 
 
Login – log in as the User specified by the extension number and Login Code entered in the Translate To 
field.  The extension number and Login Code are separated by an asterisk eg 2040*1234 
 
Logout – log out the User currently logged in and return to the User assigned to this phone 
 
Malicious Call Trace – for Australian approvals.  Send a tone on the ISDN line to the carrier to alert them 
of a malicious call. 
 
Night Service In Hours – set the Mode field to “In Hours” for the Department whose Department Name 
or extension number has been entered in the Translate To field. 
 
Night Service Out Of Hours – set the Mode field to “Out of Hours” for the Department whose 
Department Name or extension number has been entered in the Translate To field. 
 
Night Service Timed – set the Mode field to “Timed” for the Department whose Department Name or 
extension number has been entered in the Translate To field. 
 
None – no action will be performed 
 
Out Of Office Disable – set the Out of Office field to “In The Office” for the User whose User Name or 
extension number has been entered in the Translate To field.  If the Translate To field is blank this Action 
will be activated for the User on whose extension the short code was dialled. 
 
Out Of Office Enable – set the Out of Office field to “In Meeting” for the User whose User Name or 
extension number has been entered in the Translate To field.  If the Translate To field is blank this Action 
will be activated for the User on whose extension the short code was dialled. 
 
Out of Office Lunch – set the Out of Office field to “Lunch” for the User whose User Name or extension 
number has been entered in the Translate To field.  If the Translate To field is blank this Action will be 
activated for the User on whose extension the short code was dialled. 
 
Out of Office Holiday – set the Out of Office field to “On Holiday” for the User whose User Name or 
extension number has been entered in the Translate To field.  If the Translate To field is blank this Action 
will be activated for the User on whose extension the short code was dialled. 
 

Summary of Contents for Maximiser













































































































































































































































































































































































Reviews:

No comments

Related manuals for Maximiser

Rath 2400 Series Installation & Operation Manual preview
2400 Series
Brand: Rath Pages: 6
Yealink VP59-Teams Edition Quick Start Manual preview
VP59-Teams Edition
Brand: Yealink Pages: 8
Extel WEVP 630 E BIS Installation And Operation Manual preview
WEVP 630 E BIS
Brand: Extel Pages: 52
AT&T 7410 Plus User Manual preview
7410 Plus
Brand: AT&T Pages: 31
Topcom BUTLER Twin User Manual preview
BUTLER Twin
Brand: Topcom Pages: 72
VanAccess GW0221 User Manual preview
GW0221
Brand: VanAccess Pages: 24
GreatCall Jitterbug Smart2 Getting Started preview
Jitterbug Smart2
Brand: GreatCall Pages: 21
Sparkfun Electronics Port-O-Rotary Phone User Manual preview
Port-O-Rotary Phone
Brand: Sparkfun Electronics Pages: 2
VTech CS6629 Quick Start Manual preview
CS6629
Brand: VTech Pages: 2
Panasonic KX-TG2352W - 2.4 GHz DSS Expandable Cordless Phone System Description preview
KX-TG2352W - 2.4 GHz DSS Expandable Cordless Phone System
Brand: Panasonic Pages: 3
Panasonic KX-TG2313AG Operating Instructions Manual preview
KX-TG2313AG
Brand: Panasonic Pages: 10
Panasonic KX-TG2302B Operating Instructions Manual preview
KX-TG2302B
Brand: Panasonic Pages: 8
Panasonic KX-TG2313C Operating Instructions Manual preview
KX-TG2313C
Brand: Panasonic Pages: 56
Panasonic KX-TG2340JX Operating Instructions Manual preview
KX-TG2340JX
Brand: Panasonic Pages: 60
Panasonic KX-TG2313 Operating Instructions Manual preview
KX-TG2313
Brand: Panasonic Pages: 64
Panasonic KX-TG2336C Operating Instructions Manual preview
KX-TG2336C
Brand: Panasonic Pages: 68
Panasonic KX-TG2335S Operating Instructions Manual preview
KX-TG2335S
Brand: Panasonic Pages: 68
Panasonic KX-TG2388 Operating Instructions Manual preview
KX-TG2388
Brand: Panasonic Pages: 76

Brands by name

Popular brands

Load more brands