Installation and Reference Manual
Field Descriptions
Installation and Reference Manual v3.2/0410/6
317
Interquartz
For use with InterQuartz Gemini analogue phones
Pay Phone
For use with a pay phone
PCS 10
For use with the PCS 10
PCS 10 Lamp
For use with a PCS 10 to support the message waiting lamp
System Phone
For use with the PCS 520, ensures CLI information is displayed correctly and enables
paging and auto answer functionality
Trunk
Sends a disconnect signal to the end device.
Caller Display Length
The number of characters to be sent to the port. Default = 0 which represents 20 characters.
Partner Login Code
1-8 digit code. Used to secure ability to run PCS50 as an assistant on this port.
Offhook Working
Enable/Disable. Allows the use of headset without the need to lift the receiver
Regenerate DTMF
Enable/Disable. If enabled DTMF will be regenerated on this port rather than passed Inband.
DTMF Receive Mode
Auto / H.245 Signal / RTP Event / Inband only
Default = Auto. Used when equipment such a fax server or alarm system is connected to this port.
Determines how the analogue port will receive DTMF tones from the line. Leave as Auto unless specified
by the third party equipment.
Unlicensed Port
Enable/Disable. This field is used in conjunction with a 5100 Call Server. The first eight analogue ports on
a 5100 Call Server are activated on installation. However ports 9-16 require a POTS licences to enable
each port. This field will be ticked when the phone port is unlicensed. The tick should be removed when
a POTS licence has been purchased.
Page Port
None
For use if this port is to be used as a standard extension with analogue phone.
Paging
For use if powered speakers are to be connected to this port for use as a Tannoy.
MusicOnHold
For use if an external Music-on-Hold source is to be connected to this port.
Remote PSTN
The number to be dialled by the system when the User assigned to this port is working from home or on
a mobile and wishes to handle calls as though they were in the office.
Remote Idle
Seconds. The number of seconds that the User’s home telephone will remain idle before a call from the
maximiser system is cleared.
User
The name of the User to whom this port is assigned.
IP Phone
Fields specific for an IP Phone listed under a Call Server: