Installation and Reference Manual
System Operation
30
Installation and Reference Manual v3.2/0410/6
7
Select Update or Apply when ready.
8
Reboot the Call Server (please refer to page 255 for information on how to reboot a Call Server.)
Please note:
•
Using the default configuration 192.168.0.250 will be the first IP address to be given out, followed by
192.168.0.249 etc.
•
On initial connection a PCS 580, 570, 560, 410, 400 and 100 will obtain its IP address from a DHCP
server.
•
On initial connection a Phone Module will obtain its IP address from a DHCP server.
System Time
The System configuration form displays the current date and time used by the system. This setting can be
changed as follows:
1
In Manager, select Utilities
2
From the Commands list select Set Time
3
Enter the date and time required
4
Select Update when ready.
5
This information will be sent and updated on all handsets on the system
Please note:
•
The system will take into account British Summer Time.
•
If multiply Call Servers are being used on one system the above time will be the time used by the Call
Server whose Manager is being viewed. Each Call Server can have a different date and time. This
information will be sent and updated on all handsets registered to the specific Call Server.
A Time Zone can be set when the time displayed in, for example, call logging information needs to be
identified with its Time Zone. This is useful when, for example, one maximiser system with multiple Call
Servers is working across multiple countries or states and the time of a call needs to be identified with its
correct Time Zone. (For further information on working with multiple Call Servers please refer to page
72.)
Each Call Server can have a different Time Zone and is configured as follows:
1
Open Manager on the Call Server to be configured
2
Select Utilities
3
Under Commands select Set Time
4
From the Time Zone list box select the option required
5
Select Update when ready.
6
Reboot the Call Server (please refer to page 255 for further information)
Please note: Setnet can be used to set the time zone for a specific Phone Module. For further
information please refer to the Using Telnet section from page 270.
