Installation and Reference Manual
Configuring PBX functionality
78
Installation and Reference Manual v3.2/0410/6
Fax – for use with a fax machine connected to this port, provides a strong/robust ring tone improving the
fax machine’s ability to answer a call
FaxServer – for Fax Server support, please refer to page 182 for further details.
Lamp – for use with a PCS 5 to support the message waiting lamp
Interquartz – for use with InterQuartz Gemini analogue phones
Pay Phone – for use with a pay phone
PCS 10 – for use with the PCS 10
PCS 10 Lamp – for use with a PCS 10 to support the message waiting lamp
System Phone – for use with the PCS 520, ensures CLI information is displayed correctly and enables
paging and auto answer functionality
Trunk – Sends a disconnect signal to the end device.
Caller Display Length
By default the Caller Display Length is set to 0, which means 20 characters will be sent to the handset.
Change this length when more or less characters are required. Set to 16 for the PCS 10.
The information sent will display the Caller information and then the Destination information, eg John
Barrow – Support. The destination uses the first word of, eg the User name, and remaining characters
are used for the Caller’s information.
Offhook Working
Tick this box if a headset is used in conjunction with the phone connected to this port. This feature allows
the use of a headset without picking up the receiver.
Page Port
This field is used to determine the functionality of this analogue port. Select one of the following three
options:
None – this port will be used as a standard extension with an analogue phone.
Paging – this port will be used by an external paging source, for example, a tannoy or PA system.
A Paging Port Adapter is required to connect the powered speakers (please refer to page 340
for further details). This port can be paged via a Dial Plan entry, an example of which is
available on page 120. Alternatively, voicemail can be used play a message over this port as
described on page 209.
MusicOnHold – this port will be used to provide Music On Hold from an external source. Please
refer to page 177 for further details.
Remote PSTN
For information on the Remote PSTN and Remote Idle fields please refer to the Setting Up Remote PSTN
Operation section from page 111.
Fax Server Support
1
Configure the Caller Display Type on the analogue extension port connected to the Fax Server to
“FaxServer”.