Data di emissione:
Dicembre, 2018
Revisione:
1
Pag. :
39/80
Mechanical timer
If the unit is provided with a mechanical timer
to automatically control the defrost mode,
proceed with the timer regulation as described
below:
Time regulation
•
Set the hours by turning the external
ring clockwise (fig.A);
CAUTION: the external ring is divided in two
sectors of 12 hours each, respectively marked
with AM for time hours between 0 and 12 and
with PM for time hours between 12 and 24;
verify to have correctly set the desired time
hour on the desired side of the ring.
•
Set the minutes by turning the minutes
hand on the internal ring clockwise
(fig.B);
The timer is powered when the plug is
connected to the mains, in case the unit is
disconnected, it has an internal battery that will
keep the right time for 150 hours.
Timer activation
CAUTION: the timer is able to modify the unit
behaviour only when the unit itself is operating
in freeze or defrost mode.
In order to activate the timer into a precise time
period, it is sufficient to move the correspondent
tabs from the internal OFF to the external ON
position (fig.C).
When the timer is activated (white tabs on the
external ring on the ON position, fig.C), the unit
will operate in defrost mode also if the switch
number 2 is in the freeze position.
Fig. A
Fig. B
Fig. C
Summary of Contents for IPro 1 Slusher ECO
Page 75: ...Data di emissione Dicembre 2018 Revisione 1 Pag 75 80 16 SCHEMA ELETTRICO WIRING DIAGRAM ...
Page 76: ...Data di emissione Dicembre 2018 Revisione 1 Pag 76 80 ...
Page 77: ...Data di emissione Dicembre 2018 Revisione 1 Pag 77 80 ...
Page 78: ...Data di emissione Dicembre 2018 Revisione 1 Pag 78 80 ...
