INPUT 1
INPUT 2
INPUT 3-10
Disable low voltage cut off by attaching 12/24V from a positive
power feed.
Activate key-on / lock-out function from a source of 12/24V
from a positive power feed, such as a fuse or circuit that is live
when the ignition key is on. WARNING: To avoid a short, always
attach to input first, power last.
Activate any of the switches (1-8) by an external device that has
a 3.3 - 24VDC signal.
Use the jumper to switch the 8 inputs between Positive trigger input and
Ground trigger input. NOTE: this will apply to all 8 inputs.
INPUT FOR SWITCH 8
INPUT FOR SWITCH 7
INPUT FOR SWITCH 6
INPUT FOR SWITCH 5
INPUT FOR SWITCH 4
INPUT FOR SWITCH 3
INPUT FOR SWITCH 2
INPUT FOR SWITCH 1
LOCK-OUT 12/24V POWER INPUT
LOW VOLTAGE CUT OFF BYPASS
INPUT TERMINAL BLOCK
+ / - TRIGGER INPUTS
GROUND TRIGGER: 2 PINS ON THE LEFT
POSITIVE TRIGGER: 2 PINS ON THE RIGHT
INSERT WIRE AND TIGHTEN
USING A MINI
FLATHEAD SCREWDRIVER
WARNING: Always attach to
input terminal block first before
attaching to the power side.
10
9
8
7
6
5
4
3
2
1
10
9
8
7
6
5
4
3
2
1
