16
www.spokey.pl
USER’S GUI
D
E
NOTES
Please keep this operation manual for future use. This exercise machine is intended for home use only.
TECHNICAL SPECIFICATIONS
Net weight
– 25 kg, Flywheel – 4 kg
Dimensions of the assembled exercise machine
– 99 x 62 x 154cm
Maximum weight of the user
– 100kg
The equipment is designed for full body exercise
Prior to the assembly of the device and training, read carefully this
instruction manual. Safe and effective use of the device can be
guaranteed only if it is assembled, maintained, and used appropriately,
in a manner described in the manual. If you are not the user, please
provide all the users with this instruction and inform them about all
possible hazards and precautions.
Prior to starting with any exercises, please consult a doctor in order to
make sure that there are no mental or physical conditions that could be
harmful to your health and safety. The consultancy with a doctor may also
protect you against an inappropriate use of the device. A doctor will
specify whether taking drugs that would have an effect on pulse, pressure
or cholesterol level is justified.
Pay attention to your body signals. Inappropriate or excessive training
may have a negative influence on your health. Immediately stop
exercising if any of the following symptoms occurs: pain, chest
constriction, irregular pulse, exceptional shortness of breath, faints,
vertigo, nausea. If any of the above symptoms occurs, contact your
doctor immediately and give up training until then.
Children and animals should be kept away from the device. The device
is intended only and exclusively for adults.
The device should be placed on a straight, stable and tough surface,
protected with a mat or a carpet. For the sake of safety, 2 m of free space,
needed for a safe usage, should be left to each side around the device.
Prior to starting any exercises, make sure that all the bolts and nuts are
tightly fitted. Please, pay special attention to the parts that are prone to
wearing out the most.
An appropriate safety level of this device may by guaranteed only if it is
subject to regular service and inspection.
The device should be always used in accordance with its purpose.
Should during the assembly or use any of the parts appear to be faulty
or make alarming sounds, stop using the exerciser and have it serviced .
You must not use a damaged device.
During training, wear appropriate clothes. Avoid loose clothes that could
get caught in the device or such that could restrict or even make
movement impossible. It is also advised to exercise in appropriate sport
shoes. At the beginning, set a slow pace. During exerc ises, hold
handgrips and do not leave the saddle.
The bicycle is intended for home use. Maximum allowed user’s body
weight amounts to 100kg.
Take special precautions while lifting and moving the device. The device
should be always moved by two persons. While lifting or moving the
equipment, maintain an appropriate posture so as to avoid backbone
damage.
The equipment was counted among class H and C and is intended for
home use exclusively. It cannot be used as a therapeutic or rehabilitation
equipment.
While assembling the device, strictly follow the enclosed instruction and
use only the parts included in the set. Prior to the assembly, check
whether the set contains all the parts that the enclosed list includes.
It is advised against leaving control devices, which could restrict
movement, in such a position that any of the elements sticks out.
Warning: prior to starting a training on this device, read the instruction
manual carefully.we do not hold responsibility for injuries or damages to
objects caused by an inappropriate use of this product. Body injuries may
happen due to an inappropriate or too intensive training.
WARNING! Heart rate monitoring system May be inaccurate. Over
excercising May result In serious injury Or death. If you feel faint stop
excercising immediately.
Health injury may result from the incorrect or too intensive training
PREPARATIONS
1. Before assembly make sure there is enough space.
2. Use the recommended tools.
3. Before assembly check if there are all the parts in the box.
It is recommended that product should be assembled by at least two people
to avoid injuries.
ASSEMBLY INSTRUCTIONS (
Drawings
– p.
4-7)
STEP 1
Install the front (4) and rear stabilizer (2) to the main frame (1) with
the use of mounting screws (8), round nut (6) and the convex washer (7).
STEP 2
Connect the sensor cable (33) and (34) and the resistance
adjustment cable (35) and (36) as shown in the figure. Connect the lower
and upper part of the steering column (37) with screws (32), spring washers
(23) and convex washers (7).
STEP 3
Install the lower parts of side arms (23, 24) on the steering column
shaft (31). Use washers (22), D washers (51), 10 mm washers (29), spring
washers (28) and M10 screws (27). Attach the pedal guides (20, 21) to the
crank with the use of ½ washer (56), nylon washer (19), corrugated washer
(22) and screws (14 L/R).
STEP 4
Install the upper part of side arms (25, 26) to the lower parts (23,
24) with the use of the screw (30), the convex washer (7), the spring washer
(52) and the round nut (6).
STEP 5
Install pedals (18) on guides (20, 21) with the use of screws (42),
the washer (17), the spring washer (15) and the nylon nut (16).
STEP 6
Lead the pulse sensor wires (50) from the steering wheel (45)
through the steering column (37), so that they go out through its top hole.
Screw the steering wheel to the column with the use of a washer (47) and
a screw (48).
STEP 7
Connect wires: the pulse sensor (50, 53) and the rotation sensor
(41). Insert batteries (2xAA) into the meter and mount the meter (40) at the
top of the steering column (37) with the screws (39).
NOTE: before the beginning of the training, make sure that all screws and
nuts are tight.
NOTE: the rear stabilizer’s caps are designed to level the simulator.
EQUIPMENT SPECIFICATION
SAFETY REMARKS
ASSEMBLY, SETUP AND MAINTENANCE
EN
