Spokey 926483, Manual

www.spokey.eu

13

EN

3. CHARGING  

4. USAGE OF ELECTRIC BIKE    

3.1 Charging method

3.2 Charging safety tips

4.1 Ride the electric bike

4.2 Precautions before cycling

Step 1: the charge position is on the bottom of the bike.(as shown in the picture) 

Step 2: plug the charging cable into the charging hole.(make sure the connection is dry)
Step 3: the indicator lamp of the charger is red when charging. When the lamp changes green, battery is full, please stop charging when 
it is full, or it will affect the battery life.
Step 4: finish the charge by covering up the charge port and avoiding the water.

Charge at least 5 hours before the first operation.
To maximize the battery life, please charge once per month or after two days of cycling. Please charge at the suitable temperature.
Not charge on time may cause battery damage. As time went by, the battery power will be totally out ,It is not good for battery.
Please use the batteries, chargers and cables supplied by the original manufacturer and prevent the battery from being overcharged.
Please ensure that the charger cables are connected correctly at ventilated environment.
Please make sure you use it in a dry environment. Chargers or cables will never be allowed to touch water because it could lead to electric shocks. Do 
not touch with wet hands. If any failure occurs during charging, unplug immediately.
Be sure to pull out of the plug and don’t pull the plug from the cable.
Do not allow the charger or cable to contact the sharp or hot items.
Perform visual inspection of the charger and charger cables regularly. 
If the charger cable has obvious damage. Do not use charger to avoid further damage, please contact for replacement.
Please do not repair the battery, charger or cable independently. Please contact us if there is any problem.

This electric bike is a technology item instead of walking, if you don’t understand Operation specification and ride, that will lead to unpredictable 
risks. For the freshman, especially for the first time users of electric bike. We will write in detail about how to ride electric bike properly, and list out 
the precautions while riding, please make sure you read carefully and ride electric bike as required. 

Loss will be caused during cycling and parking, that will affect the performance of the product. So before you ride the bike, you must check the 
following things:
Check whether the parts of the bike are installed stable and not damaged.
Check if brakes are in perfect condition.
Check if folding mechanism is locked.
Check if there is enough electricity.
Check if the tire is in good condition.
Check if bike handle has any sign of loose, please tighten it if has.
You need to find a more open area for riding practice, at least 4m * 20m, inside or outside of the room are both ok.
You need to familiar with the environment around you. Make sure you don’t disturbed by cars, pedestrians, pets, bicycles and other obstacles.