Spokey ALEAR 928651, User Manual

12 |

EN | instruction

STEP 9 (see figJ):

1. Attach the handle bar cover(15AB/27AB) to lower handle bar 
tube (26L/R) with screws(14).
2. Attach screw decorative cover(66) to the back of the lower pe-
dal tube to cover the exposed bolt head. Add screw decorative 
cover (63) to the inner left and right pedal arms at rear.
3. Attached the pedal tube cover(48/49) to the lower handle bar 
tube (26L/R) with screws(47).

Caution: 

Now the equipment is completed assembled, if you 

find it not leveled on the floor, you can adjust it by the adjusting 
rear stabilizer tube plug(45). Make sure you have tightened all 
the screws and nuts well before beginning your workout.

4. CONSOLE INSTRUCTION

•  When you don’t use the exercise bike for a long time, please 

take out the console battery to avoid running out of battery.

•  Often clean the exercise bike with clean cloth to keep the cle-

an appearance..

•  Regularly check that the elements fastened with nuts and 

bolts are correctly tightened.

•  Remember regularly to grease moving parts.
•  Storing the equipment in a clean and dry environment away 

from children.

5. PRODUCT MAINTENANCE:

KEY FUNCTIONS:

• 

MODE: 

This key lets you to select and lock on to a particular 

function you want.

• 

SET: 

Can to proceed the data establish for “TIME” “DISTANCE” 

“CALORIES”“PULSE”.

• 

CLEAR(RESET):

 The key to reset the value to zero by pressing 

the key.

• 

ON/OFF(START/STOP):

The key to pause the signal input by pressing the key.

FUNCTIONS:

• 

TIME:

 Press the MODE key until pointer lock on to TIME. The 

total working time will be shown when starting exercise.

• 

SPEED: 

Press the MODE key until the pointer advance to SPE-

ED. The current speed will be shown.

• 

DISTANCE:

 Press the MODE key until the pointer advance to 

DISTANCE. The distance of each workout will be displayed.

• 

CALORIE: 

Press the MODE key until pointer lock on to CALORIE. 

The calorie burned will be displayed when starting exercise

• 

ODOMETER

 (IF HAVE): Press the MODE key until the pointer 

advance to ODOMETER.
The total accumulated distance will be shown.. 

• 

PULSE

 (IF HAVE): Press the MODE key until the pointer advan-

ce to PULSE .User’s current heart rate will be displayed in beats 
per minute. Place the palms of your hands on both of the con-
tact pads(or put ear-clip to ear),and wait for 30 seconds for 
the most accurate reading.

• 

SCAN:

 Automatically display changes every 4 seconds.

• 

BATTERY

 If improper display on monitor, please reinstall the 

batteries to have a good result.

OPERATION PROCEDURES:

• 

AUTO ON/OFF

The system turns on when any key is pressed or when it sensor 
an input from the speed sensor. 
The system turns off automatically when the speed has no 
signal input or no key are pressed for approximately 4 minutes.

• 

RESET

The unit can be reset by either changing battery or pressing 
the MODE key for 3 seconds.

• 

MODE

To choose the SCAN or LOCK if you do not want the scan mode, 
press theMODE key when the pointer on the function you want 
which begins blinking.