| 9
EN | instruction
4. CONSOLE INSTRUCTION
KEY FUNCTIONS:
•
MODE:
This key lets you to select and lock on to a particular
function you want.
•
SET:
Can to proceed the data establish for “TIME” “DISTANCE”
“CALORIES”“PULSE”.
•
CLEAR(RESET):
The key to reset the value to zero by pressing
the key.
•
ON/OFF(START/STOP):
The key to pause the signal input by pressing the key.
OPERATION PROCEDURES:
•
AUTO ON/OFF
The system turns on when any key is pressed or when it sensor
an input from the speed sensor.
The system turns off automatically when the speed has no
signal input or no key are pressed for approximately 4 minutes.
•
RESET
The unit can be reset by either changing battery or pressing
the MODE key for 3 seconds.
•
MODE
To choose the SCAN or LOCK if you do not want the scan mode,
press theMODE key when the pointer on the function you want
which begins blinking.
FUNCTIONS:
•
TIME:
Press the MODE key until pointer lock on to TIME. The
total working time will be shown when starting exercise.
•
SPEED:
Press the MODE key until the pointer advance to SPEED.
The current speed will be shown.
•
DISTANCE:
Press the MODE key until the pointer advance to
DISTANCE. The distance of each workout will be displayed.
•
CALORIE:
Press the MODE key until pointer lock on to CALORIE.
The calorie burned will be displayed when starting exercise
• When you don’t use the exercise bike for a long time, please
take out the console battery to avoid running out of battery.
• Often clean the exercise bike with clean cloth to keep the clean
appearance..
• Regularly check that the elements fastened with nuts and bolts
are correctly tightened.
• Remember regularly to grease moving parts.
• Storing the equipment in a clean and dry environment away
from children.
5. PRODUCT MAINTENANCE:
•
ODOMETER
(IF HAVE): Press the MODE key until the pointer
advance to ODOMETER.
The total accumulated distance will be shown..
•
PULSE
(IF HAVE): Press the MODE key until the pointer advance
to PULSE .User’s current heart rate will be displayed in beats per
minute. Place the palms of your hands on both of the contact
pads(or put ear-clip to ear),and wait for 30 seconds for the
most accurate reading.
•
SCAN:
Automatically display changes every 4 seconds.
•
BATTERY
If improper display on monitor, please reinstall the
batteries to have a good result.
Summary of Contents for EDO PRO 940638
