14
RUNNER srl
Via G. di Vittorio n. 391 - 41032 Cavezzo (MO) Italia Tel. +39 0535 58447
1.4.
Instructions for assembling the RUN7410 series treadmills
If the treadmill is consigned with low case, it’s necessary to asseble it.
The lower part of the treadmill is fully mounted while handrail/console panel are fixed to side frame parts.
Assembling operation must be done by two persons.
Instruction:
1)
Open the carton or wooden case taking off all protections.
2)
Take off all parts lying on treadmill running belt;
3)
Lift with one hand the front part of the treadmill to take off the two wooden fragments and push forward
the back side of lower part of the treadmill using the front wheels to let it slowly down from the pallet.
4)
Using a star screwdriver, unscrew the two side M6x16 inox screws that fix the plastic motor cover to the
frame.
5)
Lift softly of about 2 cm the plastic motor cover, pull it towards the running belt and take it off.
6)
Using a 17mm spanner, screw lightly 4 screws M10x50 for each side to fix the upper treadmill parts
(handrail/console panel/side frames) to the treadmill frame;
Summary of Contents for Runner RUN2011/T-PC
