9
3. Seat Sliding Tube Installation
Insert the Seat Sliding Tube (19) into the bushing on the tube of the Seat Post (21) and then
attach the Saddle Adjustment Knob (62) onto the tube of the Seat Post (21) by turning it in a
clockwise direction to lock the Seat Sliding Tube (19) in the suitable position.
Adjusting the Saddle Forward or Back
Loosen the Saddle Adjustment Knob (62) by turning counterclockwise direction until it can
be pulled out. Pull out the Saddle Adjustment Knob (62) and then slide the Seat Sliding
Tube (19) forth or back direction to the suitable position. Lock the Seat Sliding Tube (19) in
place by releasing the Saddle Adjustment Knob (62) and sliding the Seat Sliding Tube (19)
forth or back slightly until the Saddle Adjustment Knob (62) "pops" down into the locked
position. For added safety, tighten the Saddle Adjustment Knob (62) in a clockwise
direction.
NOTE: When adjusting the length of seat sliding tube, the STOP line cannot over the
both edges of the tube of the seat post.
