10
4. Seat Post Installation
Insert the Seat Post (21) into the
Ø
50x
Ø
38 Round Bushing (9) on the tube of the Main
Frame (63) and then attach the Round Knob (15) onto the tube of the Main Frame (63) by
turning it in a clockwise direction to lock the Seat Post (21) in the suitable position.
Adjusting the Seat Height
Loosen the Round Knob (15) by turning counterclockwise direction until it can be pulled out.
Pull out the Round Knob (15) and then slide the Seat Post (21) up or down direction to the
suitable position. Lock the Seat Post (21) in place by releasing the Round Knob (15) and
sliding the Seat Post (21) up or down slightly until the Round Knob (15) "pops" down into the
locked position. For added safety, tighten the Round Knob (15) in a clockwise direction.
NOTE: When adjusting the height of seat post, the STOP line cannot higher than the
edge of round bushing.
