16
Adjusting the Chain Tension
During normal operation of your spinning bike, it may become necessary to loosen or tighten
the chain for your best performance.
Loosen the M10x1.25 Nuts (51) M8 Nut (68) on the sides of the flywheel.
To tighten the chain, turn the M8x50 Bolt (67) in a clockwise rotation equally on both sides
using the Allen Wrench provided.
To tighten the chain, turn the M8 Nut (68) in a clockwise rotation equally on both sides using
the Multi Hex Tool with Phillips Screwdriver provided.
While adjusting the chain tension, work on both sides of the flywheel. Adjust the angle of
the flywheel so it is straight front to rear and evenly spaced within the frame side to side.
Adjust the angle of the flywheel by adjusting the M8x50 Bolts (67) on both sides of the
flywheel test by slowly rotating the pedals.
Finally, tighten the M8 Nut (68) and the M10x1.25 Nuts (51) on both sides alternating from
side to side.
MAINTENANCE
Cleaning
The spinning bike can be cleaned with a soft cloth and mild detergent. Do not use
abrasives or solvents on plastic parts. Please wipe your perspiration off the bike after each
use. Please inspect all assembly bolts and pedals on the machine for proper tightness
every week.
Storage
Store the spinning bike in a clean and dry environment away from children.
Allen Wrench
Tool:
Multi Hex Tool with Phillips Screwdriver
