7
ASSEMBLY INSTRUCTIONS
1. Rear Stabilizer Installation
Slide both Rear Stabilizer End Caps (59) onto each end of the Rear Stabilizer (60).
Position the Rear Stabilizer (60) behind the Main Frame (63) and align bolt holes.
Attach the Rear Stabilizer (60) onto the rear curve of the Main Frame (63) with two M8 Cap
Nuts (53), two
Ø
8 Curve Washers (54), and two M8x55 Carriage Bolts (57). Tighten bolts
and nuts with the Multi Hex Tool with Phillips Screwdriver provided.
Hardware:
2 Cap Nuts (M8)
2 Washers (
Ø
8)
2 Carriage Bolts (M8x55)
Tool:
Multi Hex Tool with Phillips Screwdriver
