TREADMILL ASSEMBLY
Step by Step Instructions
1. 1.1 Release the cords from the right lift post and pierce the cord through post, then
firm it in the support bracket
1.2 Place the walk belt between the two belt guides on the deck.
(as shown on Fig. 1)
2.
Install the left lift post to the left lift post support bracket in the treadmill's frame.
Note the screws attached to the lift post brackets and please remove these screws
firstly. Insert the data cable into the right lift post, then route it through the lift post
support bracket on the treadmill's frame. Tuck the cable in place where it will not
be pinched.
6
Fig.1
Fig.2