P. 7
© 2004 Sportcraft, Ltd.
FIG. 5
FIG. 5A
POSITION 3
POSITION 1
POSITION 2
FIG. 6
FIG. 5
10) This product must be grounded. If it should malfunction or break down, grounding provides a path of least
resistance for an electric current which can reduce the risk of electric shock.
a) For all grounded, cord-connected products: This product is equipped with a cord having an equipment-
grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local codes and ordinances.
CAUTION
: Improper
connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a
qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do
not modify the plug provided with the product - it will not fit the outlet, have a proper outlet installed by a
qualified electrician.
b) For a grounded, cord-connected product rated less than 15 amperes and intended for use on a nominal
120-volt supply circuit, either (1) or (2) applies:
(1) This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug
in Fig. 5. A temporary adapter that looks like the adapter illustrated in Fig. 5A may be used to connect
this plug to a 2-pole receptacle as shown in Fig. 5A if a properly grounded outlet is not available. The
temporary adapter should be used only until a properly grounded outlet (Fig. 5) can be installed by
a qualified electrician. The green colored rigid ear, lug, or the like extending from the adapter must
be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the
adapter is used, it must be held in place by a metal screw.
(2) This product is for use on a nominal 120-volt circuit and has a grounding plug that looks like the plug
in Fig. 5. Make sure that the product is connected to an outlet having the same configuration as the
plug. No adapter should be used with this product.
FIG. 6
11)
IMPORTANT
: PRIOR TO ANY USE, MAKE SURE THAT THE TREADMILL SITS SECURELY ON A LEVEL
SURFACE. The Incline Adjusters (#28) Position 1 = no incline. Position 2 = slight incline. Position 3 = even
more incline. Do not operate the treadmill unless both Adjusters are in the same position. (
NOTE
: A steeper
incline may increase your pulse rate.)
SPORTCRAFT® recommends that a treadmill mat be used to help protect the floor surface and the treadmill. A SPORTCRAFT® treadmill mat can
increase your enjoyment of treadmill use by dampening vibration, adding padding, protecting your investment and prolonging the life of your equipment.
Assembly of your Treadmill is now complete. Plug the power cord in to the surge protector, and the
surge protector to the wall outlet. NOTE: For more information on Belt Adjustment, see Operating
Instruction #G.
Grounded
Outlet Box
Grounded
Outlet
Metal
Screw
Grounding Pin
Adapter
Tab for Grounding Screw
Pull and Turn
Pull and Turn
Flat
