3
ThinQ XA
NOTE:
In order to activate your pedometer after purchase, you must remove the battery
insulator tab inside the battery compartment.
1.
Unscrew the battery compartment door with a
small Phillips screwdriver.
2.
Remove the tab (be sure that the battery is in
the correct polarity position – positive (+) side
of the battery is visible).
3.
Replace the battery compartment door and
tighten the fastening screw with a Phillips
screwdriver.
4.
Remove the label that appears on the
pedometer display.
REMOVING THE BATTERY INSULATOR TAB
WV4748IS01SPT.indd Sec2:3
WV4748IS01SPT.indd Sec2:3
3/20/14 12:24 PM
3/20/14 12:24 PM