Sportop RO 700, Manual

-4-

Step 1. Equip the left side connecting tube (C1) onto 

             the main frame (A). 

Step 2. Secure it by using the screw (J6) on the top and the 

             two screws (J4), two washers (J5) with the iron 

             bracket (F2) on the bottom as the right side 

             tube (C2) in “Figure 3”.

Step 3. Now you can tighten all the screws (J1, J4, 

             and J6) in 

“Figure 1”

 to 

“Figure 4”

.

Note: Make sure the central supporting tube 

           assembled in a position parallel with 

           the main frame tube, to avoid the 

           pedals hit central supporting tube.

LEFT SIDE CONNECTING TUBE ASSEMBLY

USE TOOL:6m/m

RIGHT SIDE CONNECTING TUBE  ASSEMBLY    

Step 1. As shown in Views (A & B) Assemble the right side connecting tube (C2)

             assembly to the machine.

Step 2. As shown in View (A) Assemble the tube (C2) assembly onto the upper 

             main frame. Use one screw (J6) to join the tube to the frame.

Step 3. As shown in View (B) Use two screws (J4), two washers (J5) and the iron 

             bracket (F2) to join the tube to the frame on the bottom.

   Note: Only hand tighten the screws (J4 & J6) until assembly is fully completed 

              in “Figure 4”.

USE TOOL:6m/m

VIEW A

J6

C2

VIEW B

J4

J4

F2

C2

C2

Step 4. Raise the main frame (A) by 2 people 

             and then remove the Polyfoams as 

             the diagram shown.  

A

J5

J5

J6

J4

J5

C1

A